–
| Apply adhesive material (continuous bead) to pre-coating-1-, applicator at right angle to window. |
WARNING Window must be installed within 10 minutes, or adhesive properties of window adhesive will be impaired. |
|
t
| The activator must not come into contact with the window heater bus bar. |
t
| With help of two double suction cups (V.A.G 1344) install glass pane in window aperture, centre and press in to spacing lip. |
t
| Secure window glass in position with adhesive tape during curing process. |
t
| If the adhesive bead is too thick and the adhesive expands onto the area of the window heating, excess adhesive must be removed. |
|
|
|