Golf Mk3
| Removing and installing sill panel trim |
| 1 - | Sill panel trim |
| q | Removing: |
| – | Remove securing clip → Item. |
| – | Push down on the sill panel strip -arrow B- and detach the bottom of the sill panel strip at the same time -arrow C-. |
| – | Pull the sill panel strip out of the clips → Item. |
| 2 - | Securing clip |
| q | Two-piece. |
| q | Removing: unscrew inner part with cross-head screwdriver |
| q | Installing: press outer part and inner part in turn into mounting hole |
| 3 - | Press button |
| q | Unscrew or press on. |
| 4 - | Plugs |
| q | Lever out with release lever -80-200- |
| 5 - | Trim panel |
| q | Rear section |
| q | Removing: |
| – | Remove sill panel strip → Item. |
| – | Unscrew press button → Item and lever out plugs → Item. |
| – | Push clip → Item back on its base -arrow A-. To do so, reach from inside the underseat box through the opening -arrow D-. |
| – | Remove trim. |
| q | Installing: |
| – | before installing push clip → Item completely back on the base. |
| 6 - | Clip |
| 7 - | Clip |