volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing front passenger airbag unit > < Installing

Golf Mk3

Removing and installing return spring with slip ring
Removing and installing return spring with slip ring
Driver airbag unit and steering wheel removed.
–  Separate single connector for horn.
   
–  Unscrew Phillips screws -1- and pull coil connector with slip ring -2- off the steering wheel.
  Note
t  The steering must be in the centre position (wheels in straight-ahead position) when the coil connector and slip ring are removed and installed.
t  As a new part the coil connector with slip ring is secured in the centre position by a cable tie.
  V68-0598

Removing and installing front passenger airbag unit > < Installing