volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Assembly overview

Golf Mk3

Removing
Removing
–  Remove sill panel strip → Chapter.
–  Remove upper and lower B-pillar trim → Chapter or side trim → Chapter.
   
–  Undo the locking nut -10- (20 Nm): this unscrews the tensioner unit -9- and locks it.
–  Remove anchor rail -4- → Chapter.
–  Remove belt guide.
–  Unscrew and remove belt inertia reel -1- (40 Nm).
–  Pull the tensioner unit -9- out of the cable duct -8-.

   

Installing > < Assembly overview