Golf Mk3
Assembly overview - rear door |
1 - | Door |
q | Adjusting: at hinge, within oversized holes |
2 - | Window channel |
q | Fitted into middle frame |
3 - | Window channel |
q | Fitted into window frame |
4 - | Door window |
q | Adjusting → Chapter |
5 - | Quarter light window |
6 - | Cross-head screw |
q | 3.5 Nm |
7 - | Middle frame |
8 - | Hexagon head bolt |
q | 6 Nm |
9 - | Window slot seal |
q | Pushed onto flange |
10 - | Window regulator |
11 - | Hexagon head bolts |
q | Are only loosened for removal of window regulator |
q | 10 Nm |
12 - | Cover |
13 - | Hexagon head bolt |
q | 25 Nm |
14 - | Impact carrier |
15 - | Shell/door arrester |
16 - | Door arrester |
17 - | Hexagon head bolt |
q | 7.5 Nm |
18 - | Retaining bracket |
19 - | Bolt |
q | 9 Nm |
20 - | Door hinge |
q | Screwed onto door and B-pillar (hinge bolt inserted into compartment section and secured with a grub screw; only Brussels make) |
21 - | Torx bolt -T45- |
q | 36 Nm |
22 - | Grub screw (only Brussels make) |
q | 23 Nm |