Golf Mk3
Note
|
1 - | Centre armrest |
q | Removing: |
– | Remove backrest section (double seat) → Chapter. |
– | Fold down centre armrest. |
– | Remove trim panel → Item. |
– | Remove cross-head screws → Item. |
– | Push apart bearing on bracket → Item-arrows D- and unhook bearing rod for centre armrest. (The bearing rod cannot be taken out through the opening on the bearing) |
2 - | Trim |
q | Removing: |
– | Remove backrest section (double seat) → Chapter. |
– | Fold down centre armrest. |
– | Unhook side locking lug -arrow A-, centre locking lug -arrow B- and push trim panel upwards -arrow C-. |
3 - | Backrest section (double seat) |
4 - | Bracket for armrest |
5 - | Cross-head screw |