volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Adjusting > < Checking and adjusting parallel running
Checking
Checking
–  Run glass panel into “closed” position.
–  Move back sliding headliner fully by hand.
–  Slide trim frame to rear (secured with clips in area of front guides and guided in rear area by lugs).
   
Locking hooks (with roller) -1- must be locked into the guide rails.
Pin -1- must be within the marks (notches) -arrows-.
If this is not the case, adjust parallel running as follows:
  N60-0051

Adjusting > < Checking and adjusting parallel running