volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing door

Golf Mk3

Removing
Removing
–  Disconnect multi-pin connector on A pillar. In the case of vehicles with central locking, also disconnect the dual pressure line in the multi-pin connector.
   
–  Unscrew nut -4- and pull out bolt -3-.
–  Lever off cover cap -1- using a screwdriver.
–  Remove grub screw -2- (23 Nm) from the upper and lower hinge.
–  Lift door upwards out of hinge brackets.
  N57-0014

Installing > < Removing and installing door