volkswagen Workshop Repair Guides

Volkswagen Golf Mk3 Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing window regulator

Removing and installing window regulator for Golf Mk3 Cabriolet

Removing
Removing
–  Trim removed from front door and insulation film detached.
–  Remove inner window slot seal from flange.
–  Wind down the door window and unscrew it.
–  Pull door window upwards, tilt it forwards and lift it out of the window slot.
   
–  Unclip the clip -arrow- for Bowden cables.
–  Undo hexagon bolts -1- and remove hexagon bolts -2- (10 Nm).
–  Raise the window regulator somewhat so that the hexagon bolts -1- can be drawn through the mounting holes.
–  Pull the window regulator downwards out of the mounting holes.
  N57-0020
–  For electrical window regulator, push connector -1- in the direction of the arrow and remove it.
  N57-0021

Installing > < Removing and installing window regulator