volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing door lock positioning element

Golf Mk3

Removing
Removing
–  Remove door trim and partly peel off the film from the door → Chapter.
   
–  Disconnect the pressure line -1- and multi-pin connectors -2- and -3- from the positioning element.
–  Remove door lock with positioning element → Chapter.
  N57-0006
–  Turn the rotary latch of the door lock to its “closed position”.
–  Remove Torx screws -T15--1-.
–  Unlock positioning element -arrows- and remove it from the door lock.
  N57-0007
–  When removing the positioning element, the locking lever -1- slides out of the pushrod -2-.
  N57-0009

Installing > < Removing and installing door lock positioning element