volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing front passenger airbag unit

Golf Mk3

Removing
   
Removing
  WARNING
Disconnect battery earth strap before working on electrical system.
–  Remove front passenger side storage compartment → Chapter.
–  Remove hexagon bolts -1-. Pull the airbag unit -2- out of the lower section of the dash panel and remove it from the supporting frame -3- (pay attention to the upper tab inserts -4-).
  WARNING
Electrostatic discharges may result in unintentional triggering of airbag. Therefore, the mechanic must electrostatically discharge him/herself before disconnecting the igniter and earth wires. This can be done by briefly touching the body or striker plate of the door.
–  Separate airbag unit connector -5-.

   

Installing > < Removing and installing front passenger airbag unit