Safety precautions when working on the airbag |
t
| Testing, removing, installing and repair work may only be performed by qualified personnel. |
t
| Before working on the airbag system, disconnect the battery earth strap. No waiting time is necessary after disconnecting the battery. When the airbag system is connected to a voltage source, no person must be present inside the vehicle. |
t
| Airbag units must be installed immediately after they are removed from their packaging. |
t
| If work is interrupted, the airbag unit must be replaced in its packaging. |
t
| Leaving airbag unit unattended is prohibited. |
t
| Removed airbag units must be stored with the padded side facing up. |
t
| Airbag units which have been dropped onto a hard surface or show signs of damage must not be installed in the vehicle. |
|
|
|