volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing side trim

Golf Mk3

Removing
Removing
   
–  Open the top as far as shown -in the illustration-.
–  Unscrew ball pin for push button -1- and unscrew cross-head bolt -2-.
–  Take off cover -3- and lower the top completely.
–  Remove rear bench seat → Chapter.
–  Remove lower part of backrest → Chapter.
  N70-0012
–  Unscrew hexagon bolts -1-, take out upper part of backrest -2- by pulling upwards and rest it on the folded-down top.
  N70-0013
–  Remove clip -1- and pull entry strip -2- up and out of the clips -3-.
–  Remove window crank → Chapter.
  N70-0014
–  Unscrew clip -1- and lever out clips -2-.
–  Unscrew cross-head bolts -3- and take off side trim.
  N70-0015

Installing > < Removing and installing side trim