Volkswagen Workshop Service and Repair Manuals

Note:

Lubricate all mountings and contact surfaces with MoS2grease.

• Hexagon bolt, 25 Nm
• ◆ For gear stick housing to body
• Console
• Cover plate
• Gate selector cable
• ◆ On gate selector bracket
• Gear selector cable
• ◆ On gear lever
• Spring clip
• Hexagon combi bolt, 15 Nm
• ◆ For fulcrum pin to mounting plate

• Fulcrum pin
• Mounting plate
• Cap
• ◆ Assembling => Fig. 1
• Bush
• ◆ Only fits in one position
• Spring
• Guide bush
• ◆ Locate on bush (item 15)
• Bush
• Gate selector housing
• ◆ Fit into mounting plate after fitting the complete gear stick
• Circlip

• Bush
• ◆ Only fits in one position
• Gate selector bracket
• Lock washer
• ◆ To remove and install press spring down
• Spacer sleeve
• Spring
• Gear stick guide
• Circlip
• Damping washer
• ◆ Cone faces towards the gear stick guide
• Gear stick

→ Fig.1     Fitting cap

• ‒ Press on from side (arrow 1).
• ‒ Press opening together to form a slot.

Note:

If necessary heat cap (e.g. hot water).