Golf Mk3
Torque converter
Identification of torque converter
There are different types of torque converter. |
Current torque converter with sleeve bearing in turbine shaft of gearbox. New torque converter with integrated needle bearing. Identification is by means of the code letters. → The current torque converter may only be fitted in the gearbox with a sleeve bearing in the turbine shaft. It can be identified by the fourth letter, which is either a B, C, R, T or V. Example (arrow) is a "C". |
→ The new torque converter may only be fitted in the gearbox without a sleeve bearing in the turbine shaft. It can be identified by the fourth letter, which is either a D, H, or J. Example (arrow) is a "D". Note: If a new torque converter with integrated needle bearing is fitted in a gearbox with sleeve bearing in the turbine shaft, the sleeve bearing must be removed. |