|
Removing and installing parts of exhaust system, four wheel drive
Removing and installing parts of exhaust system, four wheel drive
(Engine codes 1Z, AHU, ALE)
Front exhaust pipe and catalyst with attachments =>Page 26-14
.
Silencer with mountings =>Page 26-16
.
Notes:
-
◆ Removing and installing exhaust manifold =>Page 21-1
, removing and installing turbocharger with attachments.
-
◆ After working on the exhaust system ensure that the system is not under stress, and that it has sufficient clearance to the bodywork. If necessary, loosen double clamps and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded.
-
◆ Renew self-locking nuts.
|
