Volkswagen Workshop Service and Repair Manuals

Special tools, workshop equipment, testers, measuring instruments and auxiliary items required

• ◆ → 3337 Ring spanner set for Lambda probe

• ◆ → V.A.G 1331 Torque wrench (5...50 Nm)

Notes:

• ◆ After working on the exhaust system ensure that the system is not under stress, and that it has sufficient clearance from the bodywork. If necessary, loosen double and single clamps and align silencer and exhaust pipe so that sufficient clearance is maintained to the bodywork and the support rings are evenly loaded.
• ◆ Renew self-locking nuts.
• ◆ The exhaust system must be aligned in the longitudinal direction that the dimensions Pos. -12 -, -15 -, and -18 - can be maintained, and the exhaust system is pretensioned approx. 8 mm forwards.