Volkswagen Workshop Service and Repair Manuals

• 4 pin connector
• ◆ For Lambda probe (G39)
• ◆ On engine mount - Right
• Pressure regulating valve for crankcase breather
• Throttle valve potentiometer (G69)
• Throttle valve housing
• Digifant injection and ignition system control unit (J169)
• Intake manifold

• Cold start valve (N17)
• ◆ ▸07.93
• CO sampling pipe
• Fuel pressure regulator
• Fuel rail
• Injector (N30...N33)
• Ignition transformer (N152)
• ◆ =>Page 28-2
• Idling stabilization valve (N71)
• Distributor
• ◆ =>Page 28-3
• Coolant temperature sender (G62)
• ◆ with coolant temperature indicator sender (G2)

• Knock sensor 1 (G61)
• ◆ =>Page 28-2
• Earth connection
• Intake hose
• Temperature regulator
• ◆ For intake air preheating
• Air flow meter
• ◆ With sender for intake air temperature (G42) and potentiometer (G19)
• Air cleaner
• Activated charcoal filter solenoid valve 1 (N80)
• ◆ Activated charcoal filter system

=> Repair group 20, removing and installing parts of the fuel supply system, removing and installing parts of the activated charcoal filter system