volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Display group overview Digifant 3.2 > < Read measured value block and basic settings
Digifant injection and ignition system (4-valve)
Self diagnosis
Display group overview Digifant 3.0

Display group 00 (decimal displayed value)

▪ Engine running at idling speed, control unit in "basic setting"

Display zones

Specification

Corresponds to

1

2

3

4

5

6

7

8

9

10

Engine speed

212...202

770...890 rpm

Injection period

5...8

2.5...4.0 ms

Throttle valve potentiometer voltage

12...49

0.25...0.95 V

Lambda probe status counter

0...201)

---

Lambda control time counter

0

---

Lambda probes signal

240...100

0...1.0 V

Engine load

60...902)

23...36 %

Coolant temperature

2553)

---

Battery voltage

128...150

12.0...14.2 V

Intake air temperature

73...24

15...50 °C

1)     Counter counts high, when the Lambda probe does not supply a signal (e.g. probe cold). The value can rise to 127, when e.g. the probe heating or the probe wiring is defective. Check in "Read measured value block" function!

2)     The specifications are valid for an altitude up to max. 300 m above sea level.

3)     Before initiating the basic setting the value must be 4...10 (corresponds to 85...105 °C).

Display zones

1

2

3

4

Display group 01

Display

xxx °C

xxxx rpm

x.xx V

xx.xx ms

Indicated

Coolant temperature

Engine speed

Lambda probe voltage

Injection period

Specification

---

---

0...1.0 fluctuating

At idling, coolant temperature min. 80 °C: 2.5...4.0

Display group 02

Display

xxx °C

xxxx rpm

xx.x <°

xxx %

Indicated

Coolant temperature

Engine speed

Throttle valve angle (calculated figure, dependent on throttle valve potentiometer)

Engine load

Specification

---

---

With ignition switched on: 0...max. 86

At idling, coolant temperature min. 80 °C: 23...361)

1)     The specifications are valid for an altitude up to max. 300 m above sea level.

Display zones

1

2

3

4

Display group 03

Display

xxx °C

xxxx rpm

xxx °C

xx.xx V

Indicated

Coolant temperature

Engine speed

Intake air temperature

Battery voltage

Display group 04

Display

xxx °C

xxxx rpm

xx.x <°

xxx %

Indicated

Coolant temperature

Engine speed

Ignition timing
(calculated figure)

Engine load

Specification

---

---

This figure must not be used for checking the ignition timing.

At idling, coolant temperature min. 80 °C: 23...361)

Display group 05

Display

xxx °C

xxxx rpm

xx.x <°

xx.xx V

Indicated

Coolant temperature

Engine speed

Throttle valve angle (calculated figure dependent on throttle valve potentiometer)

Battery voltage

Specification

---

---

With ignition switched on: 0...max. 86

---

1)     The specifications are valid for an altitude up to max. 300 m above sea level.

Display group overview Digifant 3.2 > < Read measured value block and basic settings