|
Mono-Motronic injection and ignition system
Safety precautions
To prevent injuries to persons and/or damage to the injection and ignition system, the following must be observed:
-
◆ Do not touch or pull off ignition wiring when engine is running or turning at starter speed.
-
◆ The ignition must be switched off when disconnecting or connecting injection and ignition system wiring as well as test instrument cables.
-
◆ If the engine is to be turned at starter speed, without starting, e.g. when checking compressions, pull plug off Hall sender (distributor).
-
◆ Do not connect a capacitor to terminal 1 (-).
-
◆ Do not replace 1 kω (identification: R1) with a different type even for radio interference suppression.
-
◆ For suppression purposes only 1 kω resistances are to be used on the H.T. leads and 5 kω spark plug connectors.
|
