Servicing ignition system
General notes to ignition system
-
◆ Only the components which specifically relate to the ignition system are dealt with here. For the other components of the injection and ignition system => Repair group 24.
-
◆ Disconnecting and connecting the battery must only be done with the ignition switched off, otherwise the engine control unit could be damaged.
-
◆ The engine control unit is equipped with self diagnosis.
-
◆ Components marked with * are checked via the self diagnosis
, interrogating and erasing fault memory.
-
◆ For trouble-free operation of the electrical components a voltage of at least 11.5 V is necessary.
-
◆ During some checks it is possible that the control unit will recognise and store a fault. Therefore after completing all checks and repairs the fault memory must be interrogated and if necessary erased.
=> Page 01-6
, interrogating and erasing fault memory
Safety precautions => Page 28-6
Test data, spark plugs => Page 28-7
|