volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

General notes on injection > < Servicing injection system
Motronic injection and ignition system
Servicing injection system
Fitting locations overview
  • 4 pin connector
    • ◆ For Lambda probe (G39)
  • Lambda probe (G39), 55 Nm
    • ◆ Location: In front exhaust pipe
  • Activated charcoal filter solenoid valve 1 (N80)
    • ◆ Activated charcoal filter system

=> Repair group 20, removing and installing parts of the fuel supply system, removing and installing parts of the activated charcoal filter system

  • Intake manifold pressure sender (G71) with intake air temperature sender (G42)
  • Engine control unit
    • (Motronic control unit -J220)
 
N24-0293
  • Throttle valve control part (J338)
  • Knock sensor 1 (G61)
    • ◆ 
  • Ignition transformer (N152)
    • ◆ 
  • Fuel rail
  • Earth connection
  • Fuel pressure regulator
  • Distributor
    • ◆ 
  • Central connector
  • Earth connection
  • Coolant temperature sender (G62)
    • ◆ Identification: yellow ring
 
N24-0293
  • Injector (N30...N33)
  • Air cleaner
    • ◆ Removing ,
      Fig. 2
  • Spark plug, 25 Nm
    • ◆ 
  • Oil pressure switch
  • Activated charcoal filter
    • ◆ In right-hand wheel housing
    • ◆ Activated charcoal filter system

=> Repair group 20, removing and installing parts of the fuel supply system, removing and installing parts of the activated charcoal filter system

General notes on injection > < Servicing injection system