volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing speed sensor and rotor for speed sensor > < Notes for repair work on ABS, ABS/EDL
Running gear
Anti-locking brake system (ABS) and anti-locking brake system with electronic differential lock (ABS/EDL) Teves 04
Removing and installing control unit

Location

Up to 01.93: The control unit is located in the front right footwell under the floor mat in front of the seat.

From 01.93: The control unit is located under the rear seat, right.

Note:

Switch off ignition before disconnecting and connecting in connectors.

Removing

  • ‒ Press control unit securing clips together and pull out.
 
V45-0132
  • ‒ To pull connector off control unit, release control unit locking bar.

Installing

  • ‒ Install in reverse order.
  • ‒ → Engage connector catch in control unit slots (arrow A), press connector on (arrow B) and secure with locking bar (arrow C).

Removing and installing speed sensor and rotor for speed sensor > < Notes for repair work on ABS, ABS/EDL