volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Modified ABS/EDL Teves 04 unit > < Connecting brake lines from tandem brake master cylinder to hydraulic unit
Running gear
Assembly overview - hydraulic unit, brake servo/ brake master cylinder (left-hand drive)
Assembly overview - hydraulic unit, brake servo/ brake master cylinder (left-hand drive)
 
V45-0130

Notes:

  • ◆ Pump and valve block must not be separated from one another.
  • ◆ Illustration shows an exploded view of the ABS/EDL unit. Servicing of ABS unit is identical.
    Distinguishing features

=> Running gear - Self diagnosis; Repair group 01; distinguishing features between ABS and ABS/EDL

  • Brake pedal position sensor
    • ◆ Removing and installing
      .
    • ◆ Checking

=> Running gear - Self diagnosis; Repair group 01

 
V45-0130
  • Spacer cap
    • ◆ Various versions => Page 45-16
  • Sealing ring
    • ◆ Renew
  • Circlip
    • ◆ Renew
  • Brake pipe
    • ◆ Brake master cylinder/primary piston circuit to hydraulic unit
  • Brake servo
    • ◆ Supplied as a spare part with brake pedal position sender
  • Carrier plate
  • Sealing ring
  • Pin
  • Brake fluid reservoir
  • Cap
  • Securing clip
 
V45-0130
  • Hexagon socket head screw for brake fluid reservoir
  • Series resistor
    • ◆ Only on vehicles with ABS/EDL
    • ◆ Checking

=> Running gear - Self diagnosis; Repair group 01

  • Self-locking nut, 25 Nm
  • Tandem brake master cylinder
  • Protective plate
  • Hexagon bolt for protective plate
  • ABS Hydraulic unit
  • ABS/EDL Hydraulic unit
  • Brake pipe connection
    • ◆ Hydraulic unit to front right brake caliper
 
V45-0130
  • Torx bolts (T 25)
  • Brake pipe connection
    • ◆ Hydraulic unit to rear left wheel cylinder
  • Brake pipe connection
    • ◆ Hydraulic unit to rear right wheel cylinder
  • Brake pipe connection
    • ◆ Hydraulic unit to front left brake caliper
  • Brake pipe
    • ◆ Master brake cylinder/secondary piston circuit to hydraulic unit

Modified ABS/EDL Teves 04 unit > < Connecting brake lines from tandem brake master cylinder to hydraulic unit