volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing brake pedal position sender, RHD > < Removing

Golf Mk3

Installing
Installing
–  Install in reverse order.
t  Reconnect brake lines to tandem brake master cylinder and hydraulic unit → Chapter.
t  Reconnect supply pipe to hydraulic unit and reservoir → Fig..
t  Bleed brake system → Chapter.
   
Torque settings:
Brake hoses to ABS unit 
Thread M10 x 115 Nm
Thread M12 x 115 Nm

  Note
t  Hydraulic units supplied through parts system are filled with brake fluid and pre-bled.
t  Do not remove sealing plugs from hydraulic unit until corresponding brake line is fitted.
  Caution
If sealing plugs are removed from hydraulic unit sooner, brake fluid may escape and it may no longer be possible to fill and bleed the unit properly.
–  Brake lines and supply pipes must not be interchanged.
   

Removing and installing brake pedal position sender, RHD > < Removing