Golf Mk3
Assembly overview - Teves 20 Gl hydraulic unit, RHD |
Note
The pump and valve block must not be separated from one another. |
1 - | Spring retainer |
q | Secured to mounting plate. |
2 - | Self-locking nut, 10 Nm |
q | Always renew. |
3 - | Rubber damper |
4 - | Self-locking nut, 25 Nm |
q | Always renew. |
5 - | Stud, 8 Nm |
6 - | ABS hydraulic unit |
7 - | Brake pipe connection |
q | Hydraulic unit to front left brake caliper |
8 - | Brake pipe connection |
q | Hydraulic unit to rear right wheel cylinder/brake caliper |
9 - | Brake pipe connection |
q | Hydraulic unit to rear left wheel cylinder/brake caliper |
10 - | Brake pipe connection |
q | Hydraulic unit to front right brake caliper |
11 - | Control unit |
12 - | Heat shield |
13 - | Bolt, 8 Nm |
14 - | Clip |
15 - | Brake line |
q | Master brake cylinder/secondary piston circuit to hydraulic unit |
16 - | Brake line |
q | Brake master cylinder/primary piston circuit to hydraulic unit |