volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Modified weld studs on rear axle > < Servicing rear axle (vehicles with front wheel drive)
Running gear
Servicing rear axle (vehicles with front wheel drive)
Changes to track on Golf/Vento from 08.93 - Model year 1994

Rear axles with 4-hole wheel securing have had the track reduced by 18 mm within the framework of the Golf/Vento model uprating programme. Therefore the track on vehicles with 4-hole and 5-hole wheel securing on the rear axle and with a wheel offset of 38 is the same.

 
N42-0037

The change-over will be introduced gradually.

Modifying the track effects the wheel clearance in the wheel housing and to rear axle.

All original VW wheels for the Golf/Vento can be installed on vehicles after 08.93.

Wheels from the optional extras programme with other sizes and offset than the standard wheel may have insufficient clearance.

  •     A -    1358 mm on rear axles with reduced track width
  •     B -    1376 mm on rear axles up to 07.93

Modified weld studs on rear axle > < Servicing rear axle (vehicles with front wheel drive)