volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing and installing amplifier > < Digital Sound System (DSP), Golf saloon
Electrical system
Digital Sound System (DSP), Golf saloon
Removing and installing housing with amplifier and bass loudspeaker
 
N91-0111

Removing:

  • ‒ → Press luggage compartment light -arrow- on lens out of retainer until light releases
  • ‒ Pull off connector
 
N91-0099
  • ‒ → Fully loosen knurled screw -arrow-, but do not pull out
 
N91-0110
  • ‒ → Pull housing with amplifier out of upper retainer mounting -arrows-.
  • ‒ Take housing with amplifier out of lower retainer mounting and place on luggage compartment floor
 
N91-0109
  • ‒ → Loosen connectors -arrows- on amplifier and connector to bass loudspeaker
  • ‒ Loosen securing clips on housing and take out wiring harness

Installing:

 
N91-0098
  • ‒ Fit connector on amplifier and lock
  • ‒ Fit bass loudspeaker connecting wire and lock
  • ‒ → Place housing with amplifier and bass loudspeaker in lower retainer mounting -arrow-
 
N91-0110
  • ‒ → Place housing with amplifier and bass loudspeaker in upper retainer mounting -arrows- and press firmly in.
 
N91-0099
  • ‒ → Fit knurled screw and tighten
  • ‒ Attach luggage compartment light connector
  • ‒ Insert luggage compartment light in retainer and lock

Removing and installing amplifier > < Digital Sound System (DSP), Golf saloon