Volkswagen Workshop Service and Repair Manuals

The additional brake light is installed in the upper part of the rear window.

→ Removing and installing bulb holder

• ‒ Press in retaining springs and take out bulb holder.
• ‒ Pull off connector

Installation is carried out in the reverse sequence.

→ Changing bulbs

• ‒ The bulbs -3- are a push fit. They can be pulled out of and pushed into the bulb holder -4-.

•      1 -     Bulb housing
•      2 -     Reflector
•      3 -     Bulb 12V/ 2.3 W
•      4 -     Bulb holder

Removing and installing additional brake light

• ‒ → Press housing on retaining springs in direction of arrow.
• ‒ Hold housing in pressed position and slide towards tailgate lock out of retainers.

Installation is carried out in the reverse sequence.