volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Removing cover > < Removing and installing additional brake light for Vento
Electrical system
Steering column switch and ignition/starter switch
Steering column switch and ignition/starter switch
 
V94-0668
Warning!
Always disconnect the battery earth strap before working on the electrical system.

Note:

Further information on installing the steering column

=> Workshop manual, Running gear; Repair group 48; Steering; Assembly overview: Steering column, column tube, steering wheel and steering wheel with airbag

  • Horn plate cover
    • ● Removing
  • Horn plate
  • Hexagon nut
    • ● 50 ±10Nm
 
V94-0668
  • Steering wheel
    • ● Contact ring => Page 94-56 lubricate with universal grease
  • Steering column switch securing screws
  • Switch for turn signals, main and dipped beam, headlight flasher and emergency light switch
    • ● Removing => Page 94-57
    • ● From 10.98 the hazard warning light switch is located in the centre console for the convertible => Page 96-42
  • Switch for windscreen wiper and wipe/wash operation
  • Trim - upper part
  • Trim - lower part
  • Steering column
  • Support ring
 
V94-0668
  • Steering lock housing securing bolt (shear bolt)
  • Steering lock housing
    • ● Removing and installing

=> Workshop manual, Running gear; Repair group 48; Steering; Assembly overview: Steering column, column tube, steering wheel and steering wheel with airbag

  • Ignition/starter switch
    • ‒ Remove steering lock housing, then remove securing screws
  • Lock cylinder
    • ● Removing and installing => Page 94-58
  • Spring
  • Clamping washer

Removing cover > < Removing and installing additional brake light for Vento