Golf Mk4
Installing |
Note
Each time steel clips -1- and -3- are removed from C-pillar trim they must be renewed for reasons of safety.. |
– | Slide steel clip -1- in direction of arrow -arrow A- into first detent -2- in C-pillar trim. |
– | Insert steel clip -3- into mounting. |
– | Slide steel clip -1- in direction of arrow -arrow B- up to second detent -4-. |
Note
t | At the top the trim is secured with steel clip -4-, it must audibly engage. |
t | Before installing trim check clips -3- for damage and renew as necessary. |
t | Avoid damage resulting from impact! |
– | Clip trim -1- to C-pillar -2-. |
– | Secure trim with two speed nuts -5- to C-pillar. |
– | Attach spacer sleeve -6-, spring washer -7- and belt relay fitting -8- with bolt -9- (40 Nm) to C-pillar. |