Golf Mk4
| Removing and installing parts of ABS system on rear axle - Front-wheel drive |
| 1 - | ABS speed sensor |
| q | Before inserting sensor, clean inner surface of fitting hole and coat with lubricating paste G 000 650 |
| q | Removing and installing (disc brakes) → Chapter |
| q | Removing and installing (drum brakes) → Chapter |
| 2 - | Allen bolt, 8 Nm |
| 3 - | Stub axle |
| 4 - | Cover plate |
| 5 - | Wheel hub with wheel bearing and rotor |
| q | Renew each time after removing |
| q | Renew only complete |
| q | Removing and installing on vehicles with drum brakes → Running gear, axles, steering - front and four-wheel drive; Rep. Gr.42 |
| q | Removing and installing on vehicles with disc brakes → Running gear, axles, steering - front and four-wheel drive; Rep. Gr.42 |
| 6 - | Self-locking 12-point nut, 175 Nm |
| q | Renew each time after removing |
| 7 - | Cap |
| q | Pressing off and driving in on vehicles with drum brakes → Running gear, axles, steering - front and four-wheel drive; Rep. Gr.42 |
| q | Pressing off and driving in on vehicles with disc brakes → Running gear, axles, steering - front and four-wheel drive; Rep. Gr.42 |
| 8 - | Brake disc |
| 9 - | Cross-head screw |
| 10 - | Hexagon bolt, 60 Nm |
| q | With dished washer |
| 11 - | Brake drum |
| q | Release adjustment before removing brake drum → Chapter |
| 12 - | Back plate with brake shoes |
| 13 - | Axle beam |
