Volkswagen Workshop Service and Repair Manuals > Golf Mk4 > Brake systems | ABS, ADR, TCS, EDL, ESP | Removing and installing parts of ABS system on front and rear axle | Removing and installing parts of ABS system on rear axle - Front-wheel drive | Removing and installing speed sensor on rear axle (disc brakes

Removing and installing speed sensor on rear axle (disc brakes - front-wheel drive)

Removing

–	Raise vehicle.

–	Disconnect speed sensor wiring connector -1- from speed sensor.

–	Remove bolt -2- from stub axle.

–	Pull ABS speed sensor out of stub axle.

Installing

–	Before inserting speed sensor, clean inner surface of hole and coat speed sensor all-round with solid lubricant paste G 000 650.

–	Insert speed sensor into hole in stub axle and tighten bolt to 8 Nm.

–	Connect speed sensor to speed sensor wiring.