volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing crankshaft oil seal - pulley end

Golf Mk4

Removing
Removing
–  Remove poly V-belt → Chapter.
–  Remove toothed belt → Chapter.
   
–  Remove crankshaft belt pulley. To do this, lock belt pulley using counterhold -3415-.
  N13-0401
–  To guide seal extractor, screw centre bolt into crankshaft to stop by hand.
–  Unscrew inner part of oil seal extractor -3203- nine turns (approx. 20 mm) out of outer part and lock with knurled screw.
  A13-0067
–  Lubricate threaded head of oil seal extractor -3203-, place it in position and forcefully screw it as far as possible into oil seal.
–  Loosen knurled screw and turn inner part against crankshaft until the oil seal is pulled out.
  A13-0060

Installing > < Renewing crankshaft oil seal - pulley end