Golf Mk4
Parts of cooling system - body side |
Note
Coolant hose schematic diagram → Chapter |
1 - | Radiator |
q | Remove and install → Chapter. |
q | After renewing, renew entire coolant. |
2 - | O-ring |
q | Renew. |
3 - | Top coolant hose |
q | Secured to radiator by rapid action coupling. |
q | Check for secure seating. |
4 - | Cowling |
5 - | 10 Nm |
6 - | Auxiliary fan |
q | For vehicles with M equipment. |
7 - | Fan ring |
8 - | Securing clip |
q | Check for secure seating. |
9 - | Connector |
10 - | Radiator fan |
11 - | To coolant pipe |
12 - | Expansion tank |
q | Test for leaks in cooling system using cooling system tester -V.A.G 1274- and adapter for cooling system tester -V.A.G 1274/8-. |
13 - | Sealing cap |
q | Check using cooling system tester -V.A.G 1274- and adapter for cooling system tester -V.A.G 1274/8-. |
q | Pressure relief valve should open at between 1.4 and 1.6 bar. |
14 - | Bracket |
q | For fan connector. |
15 - | Bottom coolant hose |
q | Secured to radiator by rapid action coupling. |
q | Check for secure seating. |
16 - | O-ring |
q | Renew. |
17 - | Radiator fan thermal switch -F18-, 35 Nm |
q | For electric fan. |
q | Switching temperatures: |
Stage 1 on: 92…97°C; off: 84…91°C |
Stage 2 on: 99…105°C; off: 91…98°C |
18 - | Bracket |
q | For radiator. |
q | Note installation position. |
q | Note different design. |
19 - | 10 Nm |