| Adjusting accelerator cable |
| Special tools and workshop equipment required |
| –
| Hook accelerator cable into accelerator pedal and quadrant on throttle valve control module. |
| –
| Pull off retaining clip for accelerator cable. |
| –
| Depress accelerator pedal to full throttle position. |
Note | Use a second mechanic or depress accelerator pedal using a pedal depressor supported against the steering wheel. |
| Vehicles with manual gearbox |
| –
| Adjust accelerator cable by moving the retainer at the support bracket, so that the full throttle position is attained at the throttle valve control module. |
| Vehicles with automatic gearbox |
| –
| Adjust accelerator cable by moving the retainer at the support bracket, so that the full throttle position is attained and the kick-down switch clicks audibly. |
| –
| Release accelerator pedal or remove pedal depressor. |
| –
| Check idling speed and full throttle stops on throttle valve after adjusting. |
|
|
|
