- Over-centre spring mounting
-
◆ Install in mounting bracket
-
◆ Removing and installing, to renew master cylinder
=> Page 30-14
- Clutch pedal switch -F36-
-
◆ When removing and installing the switch, push clutch pedal down as far as possible by hand
-
◆ Before removing the clutch pedal, turn switch 45° anti-clockwise and remove through mounting hole
-
◆ Insert switch in mounting hole and secure by turning 45° clockwise
- Stop
-
◆ For clutch pedal
-
◆ Installation position => Page 30-18
- Self-locking hexagon nut, 25 Nm
|