volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Bleeding clutch system > < Removing

Golf Mk4

Installing
Installing
Install in the reverse order of removal, observing the following:
   
–  The retainer -A- must be fitted to the master cylinder operating rod -B-.
–  Pull piston rod out of master cylinder slightly and hold using pliers.
–  At the same time, press clutch pedal in direction of arrow until it engages, ensure that it locks properly.
  V30-0419
–  Fit stop -A- for clutch pedal again.
Installation position:
The retaining clip -arrow- points towards master cylinder -B-.
–  Install clutch pedal switch -F36- → Item, as appropriate.
Vehicles with ESP
–  Install ABS control unit and hydraulic unit → Brake systems; Rep. gr.45.
Continuation for all
–  Bleed clutch system after installing master cylinder → Chapter
  N30-0224

Bleeding clutch system > < Removing