volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Changing oil in Haldex coupling > < Checking oil level or changing oil in Haldex coupling

Golf Mk4

Checking oil level in Haldex coupling
Checking oil level in Haldex coupling
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
  W00-0427
t  Vehicle diagnosis, testing and information system -VAS 5051-
t  Diagnosis cable, 3 m with voltage supply -VAS 5051/1- or diagnosis cable, 5 m without voltage supply -VAS 5051/3-
–  Connect vehicle diagnosis, testing and information system -VAS 5051/-.
–  In the display, select „Running gear (repair group 01; 40 ... 49)“.
–  Select „All-wheel drive with Haldex coupling“ on display.
–  Select „01 - Self-diagnosis-capable system“ on display.
–  Select „All-wheel drive Haldex“ on display.
–  Select „Electrical components“ on display.
–  Select „Oil temperature“ on display.
l  The oil temperature must be between 20 and 40 °C .
l  The oil temperature can be attained by running engine until warm.
  W00-1236
–  Remove oil inspection plug -arrow-.
Oil level is correct when Haldex coupling is filled to lower edge, or at least to within about 3 mm of lower edge, of inspection hole.
–  Screw in oil plug -arrow- to specified torque → Chapter.
–  If oil level is not correct, change oil in Haldex coupling → Chapter.
  N39-0752

Changing oil in Haldex coupling > < Checking oil level or changing oil in Haldex coupling