Golf Mk4
| Removing and installing gearbox housing and selector mechanism through gearbox date 18 05 3 |
| 1 - | Countersunk bolt, 25 Nm |
| 2 - | Flange shaft with compression spring |
| q | Removing and installing → Chapter |
| q | Assembling → Chapter |
| 3 - | Reversing light switch, 20 Nm |
| 4 - | Seal |
| q | Always renew |
| 5 - | Oil drain plug |
| q | Note various versions |
| t | With multi-point socket head bolt, 45 Nm |
| t | With hexagon socket head bolt, 30 Nm |
| 6 - | Seal |
| q | Always renew |
| 7 - | Cover plate |
| 8 - | Hexagon bolt, 20 Nm |
| q | Always renew |
| 9 - | Hexagon bolt, 20 Nm |
| q | For selector shaft → Item to cover |
| q | Always renew |
| 10 - | O-ring |
| q | Always renew |
| q | Insert in groove in cover |
| 11 - | Locking bolt, 15 Nm |
| q | For selector shaft guide |
| q | Always renew |
| q | Insert with locking fluid -D 000 600 A2- |
| 12 - | Hexagon bolt, 25 Nm and turn 45° further |
| q | With captive washer |
| q | Always renew |
| 13 - | Hexagon bolt, 25 Nm and turn 45° further |
| q | Without washer |
| q | Always renew |
| 14 - | Selector shaft |
| q | Dismantling and assembling selector mechanism on gearbox side through gearbox date 18 05 3 → Chapter |
| 15 - | Hexagon bolt, 20 Nm |
| q | Always renew |
| 16 - | Selector mechanism cover |
| q | Dismantling and assembling selector mechanism on gearbox side through gearbox date 18 05 3 → Chapter |
| 17 - | Clutch housing |
| q | Repairing → Chapter |
| 18 - | Gearbox housing |
| q | Repairing → Chapter |
