volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing the handle with the black plastic part > < Removing and installing selector lever handle

Golf Mk4

Removing and installing handle with red/brown plastic part
Removing and installing handle with red/brown plastic part
–  Simply pull handle only. Do not press button in process.
If button is inadvertently pressed into handle, either pull it out again or carefully blow it out with compressed air.
   
–  It is essential to make sure before installing that the push button is pulled out at least 10 mm -a- past the pressure point.
Do this by pulling the button out by hand past the palpable pressure point so that it will not drop back again.
–  For installation, move selector lever to “D” and press handle onto selector lever.
  N37-0983

Removing and installing the handle with the black plastic part > < Removing and installing selector lever handle