volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing drive plate > < Installing

Golf Mk4

Installing PTFE-type oil seal
Installing PTFE-type oil seal
  Note
No oil or grease should be added to the sealing lip of the oil seal.
–  Remove oil residue from crankshaft journal using clean cloth.
   
–  Fit guide sleeve from assembly tool -T10053- onto crankshaft journal.
–  Slide oil seal over guide sleeve onto crankshaft journal.
  N13-0513
–  Press in seal using assembly tool -T10053- and bolt -T10053/2- (M16 x 1.5 x 60) onto stop.
–  Fit and tension toothed belt → Chapter.
  N13-0514

Removing and installing drive plate > < Installing