volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing crankshaft oil seal - belt pulley end

Golf Mk4

Removing
Removing
–  Remove poly V-belt → Chapter.
–  Remove toothed belt → Chapter.
   
–  Remove crankshaft toothed belt pulley. To do this, lock belt pulley using counterhold -3415-.
–  To guide seal extractor, screw centre bolt into crankshaft to stop by hand.
–  Screw inner part of oil seal extractor -3203- two turns (approx. 3 mm) out of outer part and lock using knurled screw.
  N13-0541
–  Lubricate threaded head of oil seal extractor, place it in position and, exerting firm pressure, screw it into oil seal as far as possible.
–  Loosen knurled screw and turn inner part against crankshaft until the oil seal is pulled out.
  A13-0060

Installing > < Renewing crankshaft oil seal - belt pulley end