Golf Mk4
| Removing, installing and tensioning toothed belt |
| Special tools and workshop equipment required |
| t | Locking pin for diesel injection pump -3359- |
| t | Pin wrench -3387- |
| t | Crankshaft stop -T10050- |
| t | Torque wrench -V.A.G 1331- |
| t | Torque wrench -V.A.G 1332- |
| t | Marking plate -T10008- (only on vehicles with hydraulic tensioning system) |
| t | Drill bit Ø 4 mm (only on vehicles with hydraulic tensioning system) |
| t | Support bracket -10-222A- with rack -10-222A/1- |
| t | Locking pin -T10115- (only on vehicles with friction damper tensioning system) |
|
