Golf Mk4
| Part II |
| 1 - | Poly V-belt |
| q | Mark direction of rotation before removing. |
| q | Check for wear. |
| q | Do not kink. |
| q | Removing and installing → Chapter |
| 2 - | 10 Nm + turn 90° further |
| 3 - | Pulley and vibration damper |
| q | Can only be installed in one position, holes are offset. |
| 4 - | 25 Nm |
| 5 - | Poly V-belt tensioner |
| q | Swing with open-end spanner to slacken poly V-belt → Chapter |
| 6 - | Alternator |
| 7 - | Bracket for ancillaries |
| q | For alternator, power steering vane pump and A/C compressor |
| 8 - | 45 Nm |
| q | Observe tightening sequence → Fig.. |
| 9 - | Banjo bolt, 30 Nm |
| 10 - | Seal |
| q | Renew |
| 11 - | Pressure line |
| 12 - | Vane pump |
| q | For power steering |
| q | Removing and installing → Rep. Gr.48 |
| 13 - | Pulley |
| q | For vane pump |
