volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Safety precautions > < Assembly overview - ignition system

Golf Mk4

Removing and installing ignition coils with output stage
Removing and installing ignition coils with output stage
Engine codes AZD, BCA, BCB
Special tools and workshop equipment required
   
t  Assembly tool -T10118-
  W00-1148
t  Puller -T10094-
Removing
  W00-1157
–  Place puller -T10094- on ignition coil with output stage -arrow-.
–  Pull ignition coil with final output stage out slightly.
–  Fit assembly tool -T10118- as shown.
–  Carefully release connector locking mechanism and pull off connector.
Installing
–  Fit puller -T10094- on ignition coil with final output stage.
–  Push connector onto ignition coil with final output stage until it audibly engages.
  N28-0284
–  Press ignition coil with final output stage into cylinder head in direction of -arrow-.
  N28-0285

Safety precautions > < Assembly overview - ignition system