volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Adjusting toe on rear axle, vehicles with four-wheel drive > < Adjusting camber on rear axle, vehicles with four-wheel drive

Golf Mk4

Adjusting toe on rear axle, vehicles with front-wheel drive
Adjusting toe on rear axle, vehicles with front-wheel drive
If values exceed the tolerances, the vehicle's transverse inclination must be checked and corrected if necessary → Chapter.
The total toe setting at the rear wheels cannot be adjusted.
The individual toe values can be evened only by moving the mounting brackets.
If the measured values exceed the permitted tolerances, check the axle beam for damage and renew if necessary.
–  Loosen all bolts on mounting bracket -1-.
   
–  Move mounting bracket -1- laterally.
2 - Rear axle beam
–  Tighten bolts to 75 Nm.
–  Always use new bolts!
  N44-0085

Adjusting toe on rear axle, vehicles with four-wheel drive > < Adjusting camber on rear axle, vehicles with four-wheel drive