Note | t
| Obtain code number from the customer before removing the radio navigation system. If the radio navigation system is replaced, it is very important that the anti-theft coding is deactivated → Chapter. The new code number should be given to the customer. |
| t
| If the radio navigation system is equipped with TV function then pull the unit out carefully ensuring that the RGB connection is not damaged. If the RGB connection is damaged then the wiring connections to the TV tuner must be renewed. The RGB connection cannot be repaired. |
| Before beginning dismantling work, perform the following steps: |
| –
| Switch off ignition and all electrical consumers and remove ignition key. |
| –
| Slide radio release tool -T10057- into release slots until they locate. |
| Top L - top and bottom on left |
| Top R - top and bottom on right |
|
|
|
