Removing and installing headlight washer system pump -V11- |
–
| Switch off ignition and all electrical consumers and remove ignition key. |
–
| Remove reservoir for windscreen and headlight washer systems → Chapter. |
–
| Push and hold down the securing clip -2- and pull the hose connection -3- off the headlight washer system pump -V11--1-. |
–
| Pull headlight washer pump -V11--1- upwards out of reservoir. |
Install in the reverse order of removal. When doing this, note the following: |
–
| On completion of installation work, bleed headlight washer system → Chapter. |
|
|
|