volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing washer jet assembly > < Removing and installing headlight washer system pump V11

Golf Mk4

Removing and installing pop-up washer jet cylinder
Removing and installing pop-up washer jet cylinder
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove front bumper cover → General body repairs, exterior; Rep. Gr.63.
   
–  Push and hold down the securing clip -1- and pull the hose connection off the spray jet pop-up cylinder.
–  Remove bolts -arrows- securing pop-up cylinder.
–  Remove pop-up cylinder from front bumper support.
Installing:
Install in the reverse order of removal. When doing this, note the following:
–  On completion of installation work, bleed headlight washer system → Chapter.
–  Adjust spray jets → Chapter.
  N92-0127

Removing and installing washer jet assembly > < Removing and installing headlight washer system pump V11